MS 08/85 SQ and SQTA

MS 08/85 SQ

SQ = Single sensor system for installation only below the belt. Typical use in the Mining aggregate,
Stone- and earth processing, Lime works, Clinker works, Cement factories, Slag processing and
Coal-burning power stations.

Nominal size	A mm	B mm	Belt wide mm	Weight kg
500	700	400	500	18
650	850	400	650	24
800	1000	400	800	28
800	1250	500	1000	44
1200	1500	500	1200	52
1400	1700	500	1400	60
1600	1900	500	1600	96
1800	2100	650	1800	130
2000	2300	650	2000	142

Other sizes on request.

MS 08/85 SQTA

SQTA = two-part sensor sytem, installation below and above the belt, for large heights of material on conveyor. Typical use in the Mining aggregate, Stone- and earth processing, Lime works, Clinker works, Cement factories, Slag processing and Coal-burning power stations.

Nominal size	A mm	B mm	Belt wide mm	Weight kg
500	700	400	500	46
650	850	400	650	57
800	1000	400	800	66
1000	1250	500	1000	100
1200	1500	500	1200	118
1400	1700	500	1400	147
1600	1900	500	1600	227
1800	2100	650	1800	296
2000	2300	650	2000	321

Other sizes on request.

H = max. burden deep + 100 mm.

CONTROL UNIT

Technical data:

Power supply:	100 to 240 V, 50 to 60 Hz +/- 10%
Power required:	15 VA
Belt speed:	0,3 - 6,0 m/s
Ambient temp.:	-20° C to +55° C
Protective class:	IP 55
Design:	Sheet steel
Mounting:	prepared for wall mounting
Weight:	18 kg
Input:	1 coaxial cable (sensor link cable)
Color:	RAL 7035 grey, treated by electrophoresis dip coating
Outputs:	Metal alarm, one relay with 1 potential free nc/no-contact, switching capacity 230V/5A, ohmic load
	Disturbance, one relay with 1 potential free nc/no-contact, switching capacity 230V/5A, ohmic load

[Home ] [Applications ] [Metal Detectors ] [Contact]